Black & Decker 20V Fast Charger MultiBoard Mount

This is a MultiBoard mount for the Black+Decker 20V Max Lithium Fast Charger (BDCAC202B). It designed to flex and snap over the charger with a handy pull tab on the bottom.  Once attached it is very secure and can hold the charger and a 4Ah 20V Max battery with ease.  To prevent your MultiBoard tiles from flexing from the weight, make sure you have enough anchor points in the wall and use offset pegs (8mm version) as needed.

For printing, I used Bambu PLA Basic with a 0.4mm nozzle with the 0.20mm Standard profile, 3 wall loops, and 15% cross hatch infill. No supports needed.

To mount this, you will need 2x 9 mm Small Thread, Flat Head, T-Bolts.  I would recommend increasing the wall loops to at least 6 for these.

I'll be adding more Multboard, Multiconnect, and Gridfinity compatible accessories for various tools, smart home devices, networking devices, and more in the future. Be sure to follow me to keep updated with my releases. Cheers!

Credits and thanks to:
Keep Making/Jonathan for MultiBoard