di0rgio

cover

IMG_5968.jpg

IMG_5969.jpg

IMG_5967.jpg

plate_1.png

2025-05-12_f4acc42e246c2.jpg

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 40x40mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm &nbsp;Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filaments &nbsp;Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Silver At layer #23 (1.92mm) swap to Jade White for the rest.

0.08mm layer, 2 walls, 100% infill

Fun little Miku keychain for Project Sekai players!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Boost me if you like this model and would like more like it!</boostcontent></boostme>

Miku HueForge Keychain (Project Sekai "Hello" Pin)

ASIA

Print Profile(1)

Description

Comment & Rating (6)

License

Related Models