Rain collector DN100
Print Profile(4)
Description
Rain collector for DN100 downpipe.
The rain collector has a 1-inch thread for hose connection.
The 1-inch connection thread must be glued.
The hose must have an inner diameter of 25 mm.
When using the connecting parts for the water barrel, seals must be printed.
Soft TPU or TPE should be used.
I personally used eSUN flexible TPE filament.
To glue the parts, I used TANGIT Set PVC adhesive 250 ml brush can ALL PRESSURE + Tangit PVC cleaner 125 ml.
However, another adhesive can also be used.
There are two versions of the rain collector with different throughputs.
Version 1 with the small through hole is more efficient.
Version 2 has lower efficiency with a large through hole.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)