MTG Swamp Deck Box - Free 3D Print Model

Search models, users, collections, and posts

The Layer Forge

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

P1P

P1S

X1E

H2D Pro

X1 Carbon

H2D

H2S

P2S

H2C

A1 mini

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.5 h

1 plate

5.0(52)

0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill

Designer

1.4 h

2 plates

4.9(28)

Open in Bambu Studio

Boost

449

1275

117

1.2 k

689

Released

Description

This Deck box is Monochromatic.
If you want to look at the Two-Toned version, you can find it here

Fits Dragon Shield sleeves:
Single Sleeved:~ 120
Double Sleeved: 100 (tight fit)

TIP: Sparkle or Galaxy filament for the main black box part tends to hide layer lines for the naked eye really well.

This box uses 4x2mm magnets.
You'll need 8 of them. I use a rubber hammer to get the 4 into the base, then put another magnet on top of each of the 4 you just hammered in, put the lid on and gently hammer the corner of the lid.
This ensures correct orientation and fit for the top magnets.

For best results, I recommend a 0.2mm nozzle for the badge and icon.
The gold badge does have a specific orientation:

Use a drop of glue to attach the icon to the gold badge. TOO MUCH WILL OVERFLOW. very little is needed.
Same goes for attaching the badge to the box lid. You do not need more than a drop or 2 of crazy glue.

Boost Me (for free)

Love my work but not ready to join the Layer Forge Fam? Boosts are a great way to say Thank You! Thanks for your support.

Membership

Get full commercial rights to print and sell our deck boxes and Hueforge designs

Join

Connect with me

Patreon | Instagram | Facebook

Comment & Rating (117)

@The_Dreamer

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

very good print. I printed it in burnt titanium to give it a sparkly black look then painted it purple with an acrylic pen, worked out well don't you think?

The profile uploader has replied

@TheLayerForge

That came out stunning! Love the artistic twist!

(Edited)

@The_Dreamer

Boosted

Replying to @TheLayerForge :

yeah, love your designs. I didn't want to burn too much filament with the colour swaps so I opted for this

(Edited)

@TheLayerForge

Replying to @The_Dreamer :

Thank you, and yeah, it's a great choice. Im working on designs better suited for single head printers. You should join my Patreon for free to be updated on when it's ready

@Nimhly

Boosted

Fantastic file! Printed perfectly, magnets fit perfect (hammered them in with the rubber grip of a pliers). Great file, love it!

The designer has replied

@TheLayerForge

Thank you!

@gilsonjd97

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed with my A1 Mini using a 0.4 mm nozzle. I had some questions about the badge quality, but it turned out perfect! Amazing design and profile, thanks! Material: eSUN PLA Black, eSUN PLA White, Winkle Silk Orange

The profile uploader has replied

@TheLayerForge

Fantastic colour choice!

@TheLayerForge

Thanks for the boost!

@kloptops

Print Profile

0.2mm layer, 2 walls, 15% infill

Gave it to my bro for his birthday, he was extremely happy with it!

The profile uploader has replied

@TheLayerForge

It came out really well. What filament did you use?

@kloptops

Replying to @TheLayerForge :

Bambu Matte Black PLA, Bambu Basic White PLA, and some some Sunlu Gold Silk PLA. :)

@Diadaga

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print, fits well together. Only thing I would consider doing is adding some additional magnet holes. They hold the lid securely enough to do its job. I’m personally just one of those people that would rather go overboard on the magnets than have to play 100 card pickup because I didn’t pay attention to what I was doing. Easily fits 100 sleeved cards with some extra space for tokens.

The profile uploader has replied

@TheLayerForge

Beautiful print. Love the red badge. Ive actually developed a new box where that wont be a concern. It'll also showcase your commander!

@ENCEPHAlTl5

Boosted

They are great! I added a divider to use one for my standard deck. Thanks!

The designer has replied

@TheLayerForge

Thank you! Love the colour mash ups

@YasiekPL

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

wow, great box, thank you

The profile uploader has replied

@TheLayerForge

Thanks! I'm glad you like them. Thanks for the boost.

@Iceenchanted

Print Profile

0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill

Made my own logo for the new Edge of Eternitie commanders.

The profile uploader has replied

@TheLayerForge

Stunning! that looks amazing!

@user_593041825

Boosted

Awesome desing, it turned great. Waiting for the commader version to print it.<3

The designer has replied

@TheLayerForge

That looks AMAZING. Commander version coming really soon.

@obadijah

Print Profile

0.2mm layer, 2 walls, 15% infill

I don't have an AMS and can't add the small piece, so I appreciate the not having to print it. my plate was also a little dirty with glue build up, so there are some minor marks on lid, and bottom, where they sat on the bed. great build. No filament waste to remove!

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.