SD / microSD card holder

Memory Card Holder – Secure and Compact Solution V2 VERSION AVAILABLE (see below)

Keep your memory cards perfectly organized and protected with this elegant card holder. Designed for photography professionals and demanding enthusiasts, this ultra-durable case can hold up to 12 microSD cards and 8 SD cards, offering an efficient solution for the storage and management of your digital equipment.

Robust, shock-resistant and weather-resistant, ensuring maximum safety even in extreme conditions. Its compact and lightweight design makes it perfect to carry with you always, both in the studio and in the field.

✅ Capacity: 12 microSD + 8 SD
✅ Design: Elegant, slim, and portable
✅ Ideal for photographers, videographers, drone pilots, and content creators

An indispensable accessory for those who work with digital data and seek order, protection, and practicality.

Version V1: the case is perfectly assembleable and features slots for 4x2 mm magnets so that it cannot open unintentionally, the head has a texture to make it elegant and grippy when opening, resting on an internal guide to keep it in place and prevent it from sliding out of the case.

I suggest assembling the pieces with strong glue and, if necessary, using a soldering iron to better seal the edges and make it more solid. I recommend printing it as it is uploaded from the files (i.e., cut and divided into multiple pieces) to better ensure print success, I advise against printing the entire internal block vertically because it requires delicate supports.

VERSION 2 of the SD and microSD card holder model !!! → added to print profiles

With this NEW VERSION, some changes have been made:

1. with this new version, some tolerances have been corrected to reduce play in the guide and make it more stable;
2. the magnets for closing the box have been removed, now there are recesses on the sides so that it can close and lock by simple mechanical interlocking (the first few times it will be stiff but after some use/light sanding it will adapt perfectly);
3. the texture of the head has been improved to make it more visible and proportionate to the body;
4. elegant and extra-fine Bambu Lab logo applied (note that this is not an official product);
5. the interlocking logic of the printed parts has also been improved

ASSEMBLY

now you just need to join the two halves of the drawer with the 4 pins and a thin line of glue on the faces, after which you will need to insert the card holder piece from the bottom of the cover, with some care and force you will have to push until you hear the click of engagement and you will see the card drawer emerge from the opposite side, on this now you just need to apply a thin line of glue and fit the knurled cap. Finally, just insert the cap on the bottom and you're done!!!