Vacuum Bed Riser Battle Kit
Print Profile(2)
Description
⚒️ No 3D printer? No time to source components?
I just opened my own e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙️.
📦 Shipping across the EU: 👉 Get it at NautilusForge.shop
Boost Me (for free)
Like this model? A free Boost is always appreciated! It supports the time that goes into designing and testing. Thank you so much! 😊🙌
I want the vacuum robot to be able to go below the kid's bed.
So here is my solution:
- Rising the bed by 27mm with the 3D feets + couple of millimeters from the felt patch
- feet are designed for a 60mm x 40mm rectangular wooden feet (see pictures)
- Felt diameter needs to be D35mm or below
- Cutting about 25mm of wood on one of the side of the bed with a jigsaw and then hiding my crime with a custom piece.
That give an additional ~5 cm to the robot to go below the bed, given that the original feet where about 5cm too.
Most robot are about 10cm high. I have a roborock (see picture)
Print:
- Advice: Make the feet strong !
Assemble:
- Screw the feet in place with a wood screw (length 30mm or more - Diam 5mm or below)
- Stick the felt below the feet (D35mm felt of below)
Seems a bit specific but I hope it helps someone !
Membership
☕ NEED MORE FROM THIS MODEL? Buy me a coffee and request specific tweaks! | 🌍 WANT TO SELL PRINTS? Join my Commercial Tiers for instant worldwide rights. | Your support keeps this hobby alive! 👉
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)