Toaster Knob for the Breville Bit More Toaster

I love my Breville Bit More Toaster, but the knob broke off. This is a replacement for the knob and optionally, the slider that the knob fits into if that is also broken.

Assembly Instructions

If you just need to replace the kob, then you only need to print the knob, and you can just stick it on, but for me, the slider behind it was also broken and needed to be replaced.

Tools needed

• Small philips screwdriver
• T10 Security Bit (T10 with a hole in the center)

Dissassembly

Carefully remove the handle on the side.

Remove the four screws on the rubber feet.

Remove the rubber feet.

Remove the screws underneath the rubber feet with a security T10 bit.

Remove the crumb tray.

Remove the 9 screws around the edges.

Remove the outer shell.

Remove the 4 screws of the cover for the controls.

Remove the screw on the circuit board.

You can optionally unplug the circuit board if it makes it easier to access the controls.

Remove the rail that holds the slider.

Remove the top screws from the rail.

That's it for the disassembly.

Add the new slider

Add the new slider and then reassemble by following the assembly instructions in reverse.

Once it is all put back together, push in the knob.

Enjoy your toast!