Floating Shelf - Free 3D Print Model

Search models, users, collections, and posts

Cosmic Prints

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

The only one you need. 2 Plates

Designer

3.8 h

2 plates

3.8(12)

Open in Bambu Studio

Boost

176

404

349

115

Released

Description

Update: Re-meshed and took out the mouse ears.

I wanted a floating shelf. I could have went to Ikea or amazon but i challenged myself to make it myself and voila. The bracket gets mounted to the wall and the shelf just slides on. Underneath are 2 holes just below the hangers so you can screw in from the bottom so the shelf doesnt slide off. I included holes in the bracket hangers as well to get it started. I suggest pre-screwing the screws first before you mount it. In regard to the size, I have printed many different sizes, and this shape and dimension is the perfect. Any bigger and it slopes and any smaller and its not enough to fit a frame. Enjoy!

If you like my stuff, visit my Patreon at Cosmic 3D Prints | Hyper fixation is awesome! | Patreon

Or if you would like to buy me a coffee, go here Mike (buymeacoffee.com)

Comment & Rating (25)

@derealdeal

I'd like to try this print out, but the mouse ears start on different layer heights, thus ruining the first layer. Any way to fix that?

The designer has replied

@BurnNoticed

hmm...first I've heard of this. last time I printed this it was OK. ill check and make sure.

@AF360

Replying to @BurnNoticed :

Apparently you have not checked / corrected because it's still broken. I cut away those "ears" layers and it finally printed without issue.

@BurnNoticed

Replying to @AF360 :

Looks like I have something to do today. lol. Thanks for reminding me.

@JamesSheldon

I will have pictures later, but the tabs are unneeded, and I can't figure out a purpose. If adhesion was worry a simple brim setting could help here. I did like the PETG approach for adhesion against a PLA print, a very good use of two materials that don't like to stick together.

@user_2259546170

Is it possible to have this downsized to 6in as opposed to 9in? Needing for a very small space for display purposes.

The designer has replied

@BurnNoticed

Have you tried shrinking it in the bambu slicer?

@user_2259546170

Replying to @BurnNoticed :

I am very new to the slicer, trying to figure it out. Right now I’m attempting to by using the scale tool.

@FONZAAY87

Print Profile

The only one you need. 2 Plates

print kept fucking up during print.

The profile uploader has replied

@BurnNoticed

Elaborate please.

@user_1445884303

Print Profile

The only one you need. 2 Plates

long brackets didn't print straight.

@Ronn5

Print Profile

The only one you need. 2 Plates

supports get in the way so you cannot push floating shelf into it

@shiro666

what are the measurements

Show original

@Origamidude736

Print Profile

The only one you need. 2 Plates

Shelf drooped a lot for me and was not really usable

@AF360

Sorry to criticize but the bracket with the tabs are badly designed and it resulted in several spaghetti prints due to missing adhesion. I finally cut all that those tab-layers away in BS and then it printed fine.

@JamesSheldon

Print Profile

The only one you need. 2 Plates

looks great, but the shelf was a little weak using PLA.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.