Weighted sign stand and magnetic sign holder
Print Profile(1)
Bill of Materials
- Magnet cube 7mm x 7mm x 7mm x 2: https://de.aliexpress.com/item/1005006760598656.html?spm=a2g0o.order_list.order_list_main.160.6dad5c5fRTJ388&gatewayAdapt=glo2deu
Description
Two ways to showcase flat 3D printed signs/ pictures / lithophanes / etc. for outdoor use in a wind resistant manner.
The stand allows to showcase a 110 x 110 x 3 mm printed picture (in this case a QR code for a food truck) inside or outdoors. I used ItsLitho (https://tool.itslitho.com/UploadImg) to convert a square image into a 3D print and print it in two colors either with AMS or by changing filament midway.
For indoor use you can just use the Sign Holder with the stand and insert the picture into the holder (glueing recommended). For outdoor use I recommend to print the Weight and fill it up with sand / stones / coins to ensure stability in windy conditions.
The magnetic sign Holder can be equipped with two 7 x 7 x 7 mm magnets (https://de.aliexpress.com/item/1005006760598656.html?spm=a2g0o.order_list.order_list_main.160.6dad5c5fRTJ388&gatewayAdapt=glo2deu) and then attached to a fridge or other metal surfaces.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)