box for silica gel AMS 2 Pro (for back) - Free 3D Print Model

There is an odd rectangular 1-layer deficit on the bottom of the box. This causes layer 2 to be printed in the air, resulting in a mess when printing the second layer. I tried it using BBL PETG HF and 0.2 std profile just to see what would happen, and stopped it on layer 3 as the print would have been unusable.

The designer has replied

@Izzodesign74

I fixed the cap problem by redesigning it, thank you for the feedback, which helped me understand the mistake.

@freakyno1

Replying to @Izzodesign74 :

Hi, strangely enough, I still have exactly this problem. I thought I had done something wrong until I read this comment. I loaded directly in Bambu Studio and also downloaded the STL file. Same problem. Greetings Freakyno1

Show original

@Glasfuzzi

Print Profile

0.2mm layer, 2 walls, 15% infill

Super part Thanks

Show original

@mofukapoka

Did you get that puppy model yourself? If not, could you share a link?

(Edited)

@Glasfuzzi

Replying to @mofukapoka :

Yes, that is my dog, if you want the model, I need your email address

(Edited)

Show original

@mofukapoka

Replying to @Glasfuzzi :

My email address is mofukapoka@gmail.com The puppy was just too cute to pass by, I couldn’t help myself. Thank you so much for this. I’m going to print a whole bunch and share them with everyone around me!

@DESERT_FOZZY

don’t recommend. prints well, but getting it out once it is in, is dang near impossible. also the lid is extremely difficult to take off without spilling silica everywhere. I would recomend you shorten the model 1mm with a removal tab and replace the snap on top with a slide on top. 👍

@joerg.tippelt

Print Profile

0.2mm layer, 2 walls, 15% infill

It fits very well and is also reasonably easy to remove. This provides more beads for moisture absorption. And the silica gel can be dried and reused. Thank you for the print file

The profile uploader has replied

Show original

@Izzodesign74

Thank you!!!

@igvvas

Print Profile

0.2mm layer, 2 walls, 15% infill

printed really nice

@kevman

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues: The top lid has a missing layer and it’s separated from the bottom

The profile uploader has replied

@Izzodesign74

I fixed the cap problem by redesigning it, thank you for the feedback, which helped me understand the mistake.

@kevman

Replying to @Izzodesign74 :

thank you , are th files updated? I will reprint and adjust my rating . let me know

@Izzodesign74

Replying to @kevman :

The updated file is the print profile file, you can only print the cap.

@blackedy

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect fit, the funnel is truly ingenious. Great respect for the designer

Show original

@KOTEP

fast print.. no issues.. really nice..

@Aleks_2020

Print Profile

0.2mm layer, 2 walls, 15% infill

everything is very good thank you

Show original

@jeanphiliph

Print Profile

0.2mm layer, 2 walls, 15% infill

The design was not suitable for the intended location.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.