David Gilmour Hueforge 200x200

First Hue on my journey through expanding our pink floyd hueforge library! Started simple. Always open to suggestions on how to optimize prints.

Project: David Gilmour hue.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Sunlu Meta Grey Transmission Distance: 3.5
    PLA Overture Matte Light Brown Transmission Distance: 0.6
    PLA Sunlu Matte White Transmission Distance: 5.3
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.72mm) swap to Grey
    At layer #8 (0.96mm) swap to Light Brown
    At layer #9 (1.04mm) swap to White for the rest.