Bird house - Free 3D Print Model

Search models, users, collections, and posts

officinebla

Household>Garden

IP Report

Print Profile(2)

All

P1S

H2C

H2D

H2D Pro

P1P

H2S

P2S

X1E

X1 Carbon

X2D

A2L

A1 mini

0.28mm layer, 2-3 walls, variable infill

Designer

10.6 h

3 plates

4.9(98)

Reduction rings

Designer

46 min

2 plates

4.9(19)

Open in Bambu Studio

Boost

1009

2769

175

114

1.7 k

870

Released

Bill of Materials

Bambu Filaments

Select all

White Oak (13106) / Filament with spool / 1 kg

PLA Wood

PLA Matte

Description

Membership

Join

Classic bird house inspired by comics.

Humidity draining holes
Front and roof removable
Back prepared for hook or nail

NOTE: If you plan to install it in a very sunny place, I recommend using PETG as filament.

Boost Me (for free)

Thank you :)

Comment & Rating (175)

@dealopes

I loved this birdhouse I just took the liberty of adding the text "Home Sweet Home" Here on my K1C it took 6h for the main part 3:30h for the roof + stick and 1h for the front wall I printed it in PLA because it will be in the shade but I plan to make another one in ABS to put on a tree It's easy to print no support needed and the fittings are perfect I only had a little difficulty fitting the front part but I think it must be intentional to be very snug and not come off easily And speaking of coming off the stick no longer fits so snugly and needs glue to fix it better But that's easy to solve so I found the project very good congratulations and thank you

(Edited)

Show original

@kranders

Print Profile

0.28mm layer, 2-3 walls, variable infill

New to printing and I love the design. Trying to print in Bambu petg but have had splits happen on two plates. any advice would be appreciated.

The profile uploader has replied

@officinebla

Hi, first of all, thanks for the comment and rating. As for your problem, it could be due to a myriad of factors, especially with PET-G. However, I would try using a 1cm brimm at zero distance from the object and/or adding elephant ear supports. The problem is due to excessive shrinkage of the lower layers. Let me know if you can solve it that way. Best regards :)

(Edited)

@Techeternal

Print Profile

0.28mm layer, 2-3 walls, variable infill

Clean and easy to assemble! Recommended if you are looking for an easy birdhouse.

The profile uploader has replied

@officinebla

Thanks a lot for nice comment, rating and beautiful picture. :)

@user_867412031

Boosted

I made this with a rainbow PLA filament and it turned out really pretty!

The designer has replied

@officinebla

Hi, is the funniest I have seen. Good job! If you want, please rate the profile. Thank you :)

@user_4290071299

Print Profile

0.28mm layer, 2-3 walls, variable infill

printed perfectly out of PLA Matte White, Black and PLA Tough Red at 50% speed on the A1 with AMS Lite. The brim is appropriate but might not even be needed at 50% speed, at higher may be necessary. a few minor tiny strands which are because of my filament and not the model itself which looks great. this was to test the fit in the back yard and have some PETG-CF coming and will scale it up slightly to put a camera in.

The profile uploader has replied

@officinebla

Thanks a lot for nice comment, rating and photos. :)

@user_249861853

Boosted

I love love this print. Was so shocked of how big it was and how easy to put together. I did PLA because this just decorations for my mantel.

The designer has replied

@officinebla

Thanks a lot for nice comment and photos. If you want rate the profile :)

@F15CHER

Print Profile

0.28mm layer, 2-3 walls, variable infill

My wife adores it

The profile uploader has replied

Show original

@officinebla

Thank you very much for the nice comment, rating, and photos. :)

Show original

@user_1504830875

Print Profile

0.28mm layer, 2-3 walls, variable infill

Great birdhouse, print worked great

The profile uploader has replied

Show original

@officinebla

Thank you very much for the nice comment, rating, and photos. :)

Show original

@user_4241019166

The birdhouse is perfect Thank you for the very beautiful design Best regards

The designer has replied

Show original

@officinebla

Thank you for your kind comment and photo. If you have the time and inclination, I would be grateful if you could rate the print profile. Kind regards

Show original

@VE5IVDave

Print Profile

0.28mm layer, 2-3 walls, variable infill

well built wall thickness will retain heat and keep cool as an air insulation. the hole is way to large for most birds and risks predatory birds to the young so a resize is needed. BUT as I am hoping the squirrel that comes for our bird feed finds it homey.

The profile uploader has replied

@officinebla

Hi, thanks for the comment, rating, and photo. In the print profiles, you'll find a adapter specifically designed for the problems you correctly mentioned. I hope that solves your problem. :)

(Edited)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.