Magcubic HY300Pro Projector Stand

HY300Pro Projector Stand 

This is a remix of the original HY300Pro Projector Stand by Manufactorum_3D, specifically designed to allow space for an Amazon Fire TV stick without hitting the wall.

🛏️ Designed for headboards and more
This version is ideal for mounting the projector on a headboard up to 6 cm thick. However, it also works perfectly on desks or tables thanks to two interchangeable screw options:

• 3.5 cm screw: fits surfaces up to 5 cm thick
• 6 cm screw: fits surfaces up to 2.5 cm thick

For the nut, two models have been left, one to insert the M5 nut during printing or another open for later placement. 

🔧 Tip for printing the screw
If you're going to print the screw using the STL file, I recommend adding a clearance of -0.2 mm.
It’s true that the first time you screw it in, it might feel a bit tight, but after inserting and removing it a few times, it moves smoothly. 

💪 Material recommendation
It’s strongly recommended to print it in PETG or another durable material as Tough PLA or PLA+ instead of Basic PLA to avoid breakage due to the increased stress of this model (as the projector's weight is distributed toward the front rather than centered).

🔩 Required hardware for assembly:

• 1x M5 nut
• 1x M5 to 1/4" adapter (available on Amazon: link)

By using a 1/4 universal nut, you can use the mount for any other device that has the same thread.

🖨 Printing tips:

• Material: PETG
• Infill: 40% or more
• Layer height: 0.2 mm
• Supports: not necessary
• Contour compensation for the crew: at least -0.2
• No raft; No brim.
• Recomendation: I applied setting spray to the print bed to improve adhesion and prevent warping or detachment.