Quest 3 Wall Mount (Headset + Controllers) - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

SmashD

Tools>Organizers

IP Report

Print Profile(2)

All

P1P

H2D

H2D Pro

P1S

X1 Carbon

H2S

P2S

X1E

A1 mini

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

5 h

1 plate

5.0(264)

better plugs, friction fit

Designer

11 min

1 plate

3.0(2)

Open in Bambu Studio

Boost

550

1341

306

270

3.5 k

2.4 k

Released

Bill of Materials

Bambu Filaments

Select all

Matte Ivory White (11100) / Filament with spool / 1kg

PLA Matte

Description

I have combined @toolmantim313's works and made it a compact, single model to print (still support-less) while rearranging the controller holders and reinforcing the headset part. Don't exactly know if the reinforcement was needed, just felt like it's better safe than sorry 😅

The printed model is quite sturdy, I don't have any doubt it'll hold up, but please check your filament and print quality thoroughly before hanging your expensive headset to the wall 😉

The screw hole plugs are finicky, you may need a little dab of glue to fix them.

Please note:
I have done a redesigned version (to address the proximity sensor), but since I would like to test (and use) the new version and my A1 sadly is making a lot of trouble for the past weeks ...

Version 1.1 is available here

(mainly extra large opening for the proximity sensor)

Thanks for downloading and printing!

Boost Me (for free)

If this model brought joy, convenience, or made your printer do something vaguely impressive, please consider tossing me one of your boosts. It costs you nothing… except a tiny piece of your prints. (Just kidding! It’s free! And helps a lot.)

Comment & Rating (306)

@Raroun

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Perfect – finally some desk space again :)

The profile uploader has replied

Show original

@smashd

Great photos, thanks!

@CM_GB

Printed perfectly, had my plate set wrong so did loose the screw caps, but will re-print those.

The designer has replied

@smashd

To be honest those screw caps are working but really just a last minute thing. Couldn't stand seeing the screw heads though 😄 glad you like it, I am using it since uploading and still happy with 😁

(Edited)

@DocInfinity

Print Profile

0.2mm layer, 2 walls, 10% infill

printed with translucent petg and came out really cool! thanks :)

@nprracer94

Print came out fantastic and is exactly what I was looking for. Super clean. One change I'd recommend is adjusting the cutout to keep the proximity sensor from triggering when you sit it on the base.

The designer has replied

@smashd

Did not even think about that because I always shutdown the Quest, but seems to be a great idea nonetheless

@user_89014171

Boosted

This is so perfect and exactly what I needed! designs like these are EXACTLY why I bought a 3D printer :)

@Requinic

Print Profile

0.2mm layer, 2 walls, 10% infill

Good design. Profile worked perfectly. Unfortunately, the proximity sensor brought up by another user is not solved with the tiny triangle. I like that when I put the unit up on the wall, it will go to sleep instead of burning through the battery. I drilled this hole because I didn't want to modify and reprint. Hole works perfectly. Author or remixer could just make the triangle much bigger. Triangle works best as it wouldn't need supports.

The profile uploader has replied

@smashd

I have done a redesigned version, but since I would like to test (and use) the new version first and my A1 sadly is making a lot of trouble for the past weeks ...

@ROBOLABS

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

This printed perfect and the screw covers actually worked! I now have my Quest 3 off my desk and more easily accessible to use, which will probably make me want to use it more. I even hung my travel case from the mount as well.