Search models, users, collections, and posts
4" Dust Collector Ball Valve
IP Report
Print Profile(1)
Variable Layer Height 2 walls, 15% infill
Designer
45.3 h
5 plates
Open in Bambu Studio
Boost
177
646
17
14
344
77
Released
Description
4" Dust Collector Ball Valve
Features
- Fits 100mm (107mm OD) PVC pipe for dust collector system
- The bottom housing is threaded so that you use a flexible hose if required
- Optional magnets to help keep the handle from rotating
- The guide and handle can be attached without a M4
Printing
- Recommended that you print the ball valve with a brim given there there is very little contact with the build plate
- For the housing use ears or a brim as they tend to warp
- Use variable layer height for the threaded pieces
- To adjust how far the valve sits from away from your wall modify the Z height of the mounting plate.
- By default the mounting plate is 0.5" high
Hardware
Required
- 4 x ¾" ¼-20 Bolt
- 8 x ¼ Washer
- 4 x ¼ Nut
- 4 x #10 or #10 wood screw
Optional
- 2 x M4 Brass threaded insert
- 1 x M4 - 8mm Bolt
- 1 x M4 - 45mm Bolt
- 3 x 6x2mm magnet
- 12 x 8x5 magnet
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)