Tremors Movie Poster - Hueforge Art - Free 3D Print Model

Search models, users, collections, and posts

Lumpy3D

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

2.7 h

1 plate

5.0(16)

Open in Bambu Studio

Boost

Released

Description

Boost Me (for free)

Most of my Hueforges don't get a lot of downloads, so I make most of my points through boosts. I super appreciate any boost, It helps me continue making Hueforges. 😁 Thanks

Hueforges can be resized if you only change the X and Y scale, and leave the Z height the same.

Hueforge art of the movie “Tremors” (1990)

Project: Tremors (1990).hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #12 (1.04mm) swap to Yellow
    At layer #17 (1.44mm) swap to Jade White for the rest.

Collection getting to BIG?

Check out my Hueforge poster storage bin!

Join me on Patreon!

Comment & Rating (20)

@Mr.B_Mr.H

Print Profile

0.08mm layer, 2 walls, 100% infill

Simply every poster is incredibly perfect! Thank you so much for your tireless effort and for sharing your models for free 👍🏻

Show original

@user_2240205488

Print Profile

0.08mm layer, 2 walls, 100% infill

Printed perfectly

@Somairot

Print Profile

0.08mm layer, 2 walls, 100% infill

One of my most favourite films ever 😊👍🏻👍🏻

@GlassCookie

Boosted

I absolutely love this!

@msanch2

Print Profile

0.08mm layer, 2 walls, 100% infill

@Nyko88

Print Profile

0.08mm layer, 2 walls, 100% infill

@JhszBnc

hello! i haven’t AMS. When the color change is coming the printer will stop? or i need to put a pause in? I try to put in but i can’t put where it’s write the color change.

The designer has replied

@Lumpy3D

The printer should pause buy itself if you dont have an ams

@JhszBnc

Replying to @Lumpy3D :

Thank you the answer.

@tiskar_ondra

Print Profile

0.08mm layer, 2 walls, 100% infill

@Mjmacka

Print Profile

0.08mm layer, 2 walls, 100% infill

@JhszBnc

Print Profile

0.08mm layer, 2 walls, 100% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.