Big Block Ninjago Zane - Free 3D Print Model

Search models, users, collections, and posts

Austin

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

X1 Carbon

P2S

H2C

P1P

P1S

H2D

X1E

H2D Pro

H2S

X2D

A2L

0.2mm layer, 2 walls, 7% infill

Designer

30 h

8 plates

4.9(7)

Open in Bambu Studio

Boost

125

283

226

Released

Description

Boost Me (for free)

If you like the model, give it a boost, rating & like! Costs nothing but goes a long way :)

My kids have wanted these ninja versions of the blocks since we started printing them but I could not find them anywhere. Figured i would share with others as well.

Filaments:
- Generic PLA profile with no changes to the defaults
- Overture for the black
- Kingroon PLA for the blue & green
- SUNLU PLA for the red
- Amolen PLA+ for the peach
- Greeetech silk PLA for the gold & silver (prone to cracking, be careful)

Revisions:
Rev 1 changes 11/18/25: Address some user mentioned issues
Head loose on torso: confirmed
Increased top of torso cylinder size
Hood loose on head: confirmed
Fixed inside of hood where head slots in
Other things mentioned and addressed
Change the support on some pieces
Change the infill on some pieces
Change the orientation of the legs for faster printing
Change the orientation of the weapons for strength
Change the orientation of the hood for strength on the rear
Reduced print time and filament usage

Tested this with multiple parts from multiple models (from other creator models as well) to confirm the head/hood issues & that the hands fit in the arms

big block

ninja

ninjago

Comment & Rating (26)

@fryc88

Boosted

The print profile is no longer public

Other Issues:overall it's nice, however dimensions aren't ideal. head got too big hole for "neck", same with sword holder going on "neck" is way too loose - head doesn't even stay on (over 1.5mm too big). "hips" into body are way too tight, arms into body a bit tight so my model cracked. if these would be improved it would be great model. also "helmet" decor on the back way too thin, it snapped when I was taking off supports.

The profile uploader has replied

@austinbest

Thanks for the feedback & the boost. A lot of that is in the silver filament, i have similar issue with silver and gold but not with other colors. It is the exact same model size as all the rest of them and none of the others have these problems.

@fryc88

Boosted

Replying to @austinbest :

with the cracks I agree - this is related to silk filament, but dimensions of printed model are matching stl, so root of this problem is unfortunately still sizes of holes and inserts. I did measure the model after printing because I was surprised about parts being too loose or too tight. the top part of head is hard to measure in STL because of lower amount of polygons but I have measured about the same 23.9 in biggest part of it in model.

@austinbest

Replying to @fryc88 :

You can measure it inside studio, the inside of the helmet should be 24.1 and the head should be 23.9. I can maybe make an extra head/helmet/arm connector with slightly different dimensions to be used when printing with the silver silk to try and help.

@mcraig5187

Print Profile

0.2mm layer, 2 walls, 7% infill

Great models, printed all of them for the Ninjago obsessed kids.

The profile uploader has replied

@austinbest

Awesome, that made me smile. Glad they enjoy them and thanks for the rating and pic! I know you posted on multiple but i am going to reply on them all as this is a good one!

@Eule488

Print Profile

0.2mm layer, 2 walls, 7% infill

Top Druck

(Edited)

The profile uploader has replied

@austinbest

Thanks for the rating!

@Pyrostrologyc

The print profile is no longer public

Magnificent!! I tweaked some details to improve it, but it's truly magnificent

The profile uploader has replied

Show original

@austinbest

Awesome! Glad it came out well for you.

@arniej

Print Profile

0.2mm layer, 2 walls, 7% infill

Awesome print!

The profile uploader has replied

@austinbest

Thanks & thanks for the rating!

@Imf1122334455

what color did you use

The designer has replied

@austinbest

You posted on 10 models the same thing over and over. Did you not look at description on any of them first???

@Johnny.Casino

Print Profile

0.2mm layer, 2 walls, 7% infill

The profile uploader has replied

@austinbest

Thanks for the rating!

@Charlinou09

Print Profile

0.2mm layer, 2 walls, 7% infill

The profile uploader has replied

@austinbest

Thanks for the rating!

@user_1907335928

The print profile is no longer public

The profile uploader has replied

@austinbest

Thanks for the rating!

@TheTiyFactoryCo

The print profile is no longer public

The profile uploader has replied

@austinbest

Thanks for the rating!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Ninjago Sword of Fire

Bionic Armory

9.8 k

3 k

Big Block Ninjago Zane v2

Austin

362

232

Ninjago Shurikens Of Ice (Zane)

NEW Sanding Block With Tensioner, HRCv3 available!

vajcnerd

7.8 k

2.6 k