Pokemon TCG Pocket: Solgaleo & Lunala FA Hueforge

Hello hello,

Been a while since I did a Pokemon TCG hueforge but the Solgaleo and Lunala FA really made impression on me (if only i can get the cards...)

05/10 Update: I forgot to upload the 4 colour version which gets rid of the red filament so its easier to use with one AMS

Notes:

• Only change the X and Y dimensions, do not change the Z value which is the thickness
• Due to the thin base layer please remove the hueforge with care
• The model is simplified in order to be upload for full HD model please replace the STL with the downloadable,

Filaments Used:
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Black Transmission Distance: 2
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:
    Start with Blue
    At layer #8 (0.72mm) swap to Black
    At layer #11 (0.96mm) swap to Red
    At layer #17 (1.44mm) swap to Yellow
    At layer #19 (1.6mm) swap to Jade White for the rest.
 

Will do another tomorrow before I go on break for 2 weeks. 

Catch ya later, byeeeeeeeee