This is a reworked version of this great model https://www.thingiverse.com/thing:5541988 if you make this please go heart his model too.
Johnny stands about 40 inches tall and has a Amazon Alexa echo in his chest with a led sound module feeding leds in his mouth whenever its playing sounds. https://www.amazon.com/gp/product/B09FJL2VL2/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
I used an old usb cable for the smaller hydraulic lines. I printed mine in Sunlu silk pla+ all outer walls at 40/mms. I attached all parts with ca glue and activator and for the shoulder and elbow pegs I use tape to make the joint tight so it can still move but lock in place.
Due to file size I uploaded as draft quality, i printed all mine at .2 layer height with 15% infill and 3-4 walls
Also more than one part can fit per plate it was having issues uploading full plates.
Supports are a per plate situation and all are not the same, you will need to pick the best option for each print, I already have the parts in the best orientation to print. The 4th slot is swapped out for the red toolbox