youcloud

cover

IMG_3501.gif

1.jpg

2.jpg

3.jpg

plate_1.png

plate_2.png

2025-05-08_471b5e5d21438.gif

Supports are needed — tree supports are recommended for best results.Make sure to print the main container upside down to ensure proper overhangs and a clean surface finish.The model is split into three parts for easier printing and assembly.No glue required — the lid clips gently into the holder.

0.2mm layer, 6 walls, 25% infill

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Like it? Boost it 💖 – every boost helps a lot!</boostcontent></boostme> Description (German version below 🇩🇪)&nbsp;IKEA RÅSKOG Garbage BinA practical snap-on garbage bin designed specifically for the IKEA RÅSKOG utility cart.The model is smartly divided into three parts for easy printing and assembly.The main container must be printed upside down for best results.Supports are required — tree supports are recommended (see print profile for details).The lid can be carefully clipped into the holder for a secure fit.A clean and functional addition to your RÅSKOG setup!&nbsp;👉 Also check out my IKEA RÅSKOG Cup Holder here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1389911">https://makerworld.com/de/models/1389911</a> 👉 Also check out my IKEA RÅSKOG Phone and Remote Holder here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1474007">https://makerworld.com/de/models/1474007</a> 👉 Also check out my IKEA RÅSKOG Hook here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1754318">https://makerworld.com/de/models/1754318</a>&nbsp;_________________________&nbsp;Beschreibung (Deutsch 🇩🇪)&nbsp;IKEA RÅSKOG AbfallbehälterEin praktischer, aufsteckbarer Mülleimer speziell für den IKEA RÅSKOG Servierwagen.Das Modell ist sinnvoll in drei Teile unterteilt, um den Druck und die Montage zu erleichtern.Der Container selbst muss zwingend kopfüber gedruckt werden, um beste Ergebnisse zu erzielen.Supports sind erforderlich — empfehlenswert sind Tree Supports (siehe Druckprofil für Details).Der Deckel kann vorsichtig in den Halter eingeklipst werden und sitzt dann sicher.Eine saubere und funktionale Erweiterung für deinen RÅSKOG-Wagen!&nbsp;👉 Schau dir auch meinen Getränkehalter für den IKEA RÅSKOG an: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1389911">https://makerworld.com/de/models/1389911</a> 👉 Schau dir auch meinen Halter für Smartphone und Fernbedienung an:  <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1474007">https://makerworld.com/de/models/1474007</a> 👉 Schau dir auch meinen Haken an: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1754318">https://makerworld.com/de/models/1754318</a>&nbsp;

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Like it? Boost it 💖 – every boost helps a lot!</boostcontent></boostme> Description (German version below 🇩🇪)&nbsp;IKEA RÅSKOG Garbage BinA practical snap-on garbage bin designed specifically for the IKEA RÅSKOG utility cartThe model is smartly divided into three parts for easy printing and assemblyThe main container must be printed upside down for best resultsSupports are required — tree supports are recommended (see print profile for details)The lid can be carefully clipped into the holder for a secure fitA clean and functional addition to your RÅSKOG setup&nbsp;👉 Also check out my IKEA RÅSKOG Cup Holder here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1389911">https://makerworld.com/de/models/1389911</a> 👉 Also check out my IKEA RÅSKOG Phone and Remote Holder here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1474007">https://makerworld.com/de/models/1474007</a> 👉 Also check out my IKEA RÅSKOG Hook here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/1754318">https://makerworld.com/de/models/1754318</a>&nbsp;_________________________&nbsp;Description (German 🇩🇪)&nbsp;IKEA RÅSKOG Garbage BinA practical snap-on garbage bin specifically for the IKEA RÅSKOG utility cartThe model is smartly divided into three parts for easy printing and assemblyThe main container must be printed upside down for best resultsSupports are required — tree supports are recommended (see print profile for details)The lid can be carefully clipped into the holder for a secure fitA clean and functional addition for your RÅSKOG setup&nbsp;👉 Also check out my IKEA RÅSKOG Cup Holder here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1389911">https://makerworld.com/en/models/1389911</a> 👉 Also check out my IKEA RÅSKOG Phone and Remote Holder here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1474007">https://makerworld.com/en/models/1474007</a> 👉 Also check out my IKEA RÅSKOG Hook here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1754318">https://makerworld.com/en/models/1754318</a>

IKEA RASKOG Garbage Bin

SmartLivingEV

Screen Shot 2026-04-11 at 17.35.09 PM.png

Ikea Raskog Bin

Tebius

IMG_2145.jpeg

IMG_2143.jpeg

IMG_2144.jpeg

IMG_2146.jpeg

IMG_2147.jpeg

IMG_2148.jpeg

IKEA RASKOG Filament Poop Bin for A1 Mini

ASIA

Print Profile(1)

Bill of Materials

Description

Comment & Rating (17)

License

Remixes (2)

Related Models