Wind Turbine Mini Model Enercon, Carry Version Box

A little wind turbine you can take apart and carry with you.

Features:

• Spinning rotor
• Blade pitch adjustable
• dismountable
• carry box with integrated stand
• extra stand

Problems printing the blades?

• Make sure your build plate is clean. (Scrub with soap and water and/or use ipa and some clean towels) 
• Slow down the print speed. Either manually (50% or silent option) or choose the Generic PLA profile. 
• Definitely add a inner and outer brim with 0 or 0.01 mm max. brim-object gap. 
• Avoid having other printers run next to the ones printing currently in order to reduce vibrations. 
• Print only one blade at a time. 

Hope these steps are getting you to a satisfying result.

Assembly:

1. For assembly you need 10 magnets with the size of 3x6 mm. (height x width)
2. And a little bit of glue to attach the nacelle to the upper tower section.
3. Pro tip: If you press the first magnet into the bottom section of the tower you can use the tower as a tool for pressing in the other magnets.

If you like wind turbines check out also my other designs. :)