Print Profile(1)
Description
SensorPush mounts designed for easy removal of the sensor using just enough interference fit.
Use the correct mount for your sensor!
HT1 has different dimensions compared to HT.W & HTP.XW!
There are three versions for the HT1 and three versions for HT.W & HTP.XW:
- Screw-on mount (designed to be used with M3x8 with round head)
- Glue-on mount (designed to be use with Tesa PowerStripe “small”)
- Stick mount (just push it into something soft)
Pay attention to the orientation of the sensor in the mount!
The hole exposing the sensor shold always face away from the mount.
This has two reasons:
- The cases have different dimensions for top and bottom part and the mounts are designed to accomodate for that
- The sensor should not be blocked by the case
If inserted the wrong way, it will not work as designed.
Have fun!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)