A building-block style lamp. Integrated within are three 300 x 25 x 9 mm (L x W x H) 12W 900Lm LEDs from Albrillo.

The lamp is printed in ten parts for ease of fabrication. Pins are affixed using super glue. The base plate is secured with six screws (see image), the corner screws subsequently covered with self-adhesive silicone bumpers.

A lamp in a building block design. Inside there are 3 LEDs in the format (length x width x height) 300mm x 25mm x 9mm 12W 900Lm from Albrillo.

The lamp is printed in 10 parts to make printing easier. The pins are glued in with super glue. The base plate is screwed with six screws (see picture). The screws in the corners are then covered with self-adhesive silicone protective buffers.

Anycubic

Yes

0.3