MTG Forest Deck Box - Free 3D Print Model

Search models, users, collections, and posts

The Layer Forge

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

P2S

H2C

X1 Carbon

P1P

X1E

H2D Pro

H2D

H2S

P1S

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

18.4 h

1 plate

4.8(22)

0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill

Designer

1.5 h

2 plates

5.0(4)

Open in Bambu Studio

Boost

332

1105

585

187

Released

Description

You can find the monochromatic version here:
https://makerworld.com/en/models/1410461-forgedeck-echo-green-mtg-forest-deck-box#profileId-1464120

Fits Dragon Shield sleeves:
Single Sleeved:~ 120
Double Sleeved: 100 (tight fit)

TIP: Sparkle or Galaxy filament for the main black box part tends to hide layer lines for the naked eye really well.

This box uses 4x2mm magnets.
You'll need 8 of them. I use a rubber hammer to get the 4 into the base, then put another magnet on top of each of the 4 you just hammered in, put the lid on and gently hammer the corner of the lid.
This ensures correct orientation and fit for the top magnets.

For best results, I recommend a 0.2mm nozzle for the badge and icon.
The gold badge does have a specific orientation:

Use a drop of glue to attach the icon to the gold badge. TOO MUCH WILL OVERFLOW. very little is needed.
Same goes for attaching the badge to the box lid. You do not need more than a drop or 2 of crazy glue.

Boost Me (for free)

Love my work but not ready to join the Layer Forge Fam? Boosts are a great way to say Thank You! Thanks for your support.

Membership

Get full commercial rights to print and sell our deck boxes and Hueforge designs

Join

Connect with me

Patreon | Instagram | Facebook

Comment & Rating (44)

@user_3665682951

Printed this box just today to add to my collection. decided to go with a different colour but i plan to print all of them to match! but why is the little crest a different nozzle. i can't use your profile lol.

The designer has replied

@TheLayerForge

Sorry the detail is so fine that a 0.4mm doesn't do a great job. I can upload the gold part in 0.4 if you'd like, but the white Icon needs 0.2mm

@user_3665682951

Replying to @TheLayerForge :

yes please lol!

@TheLayerForge

Replying to @user_3665682951 :

you can find it here: https://makerworld.com/en/models/1414242-icon-for-fordgedeck-accent-echo-deck-boxes#profileId-1598107

@aglezerman

Boosted

very slow to print and lots of waste, but damn if it isnt beautiful (still need to print the pendant)! p1s 0.4mm nozzle bambu pla sparkle green sunlu pla+ 2.0 black

The designer has replied

@TheLayerForge

Thank you! and I know. I'm working on less wasteful designs, but they never really have that same beauty! I appreciate you giving it a chance! Sparkle really makes it pop!

@user_3665682951

i did my boxes slightly different as i only have a .04 nozzle but i like em. gives it a gemstone feel

The designer has replied

@TheLayerForge

Oh. I love that! Great choice!

@spicedroid

Print Profile

0.2mm layer, 2 walls, 15% infill

Absolute quality box. the lid came out perfectly but the bottom hat some issues with the pattern. I tried to print the bottom part again but with another orientation. as soon as the issue with the pattern appeared again I stopped the print. as to be seen in the pictures, the pattern issue is exactly the same in the second try. but this aside, it's ab stunning box. I just wish, the profiles for a1 mini would also be online.

The profile uploader has replied

@TheLayerForge

Hey, can did you tweak any settings? Feel free to sgoot me a message. Would be happy to improve the profile! You deserve a bottom to match the quality if the top

@Conceptual.Wolf

Boosted

Fantastic!

The designer has replied

@TheLayerForge

That looks AMAZING! Thanks for giving it a shot!

@user_1597531707

Boosted

Turned out gorgeous! I just need a golgari badge 😁😁

@user_1033276217

Print Profile

0.2mm layer, 2 walls, 15% infill

if you look really careful you might be able to tell when I paused overnight. excellent design 👍

@user_3256340914

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@TheLayerForge

Wow. I love how that came out!

@user_3256340914

Boosted

Replying to @TheLayerForge :

Yeah, it looks great! Great file.

@fracturedsanity

You could probably reduce waste by designing it so the sides are insertable panels (would also allow for massive customization)

@Conceptual.Wolf

Boosted

Its printing!

The designer has replied

@TheLayerForge

Sweet! Hope it turns out amazing. What filaments did you use?

@Conceptual.Wolf

Boosted

Replying to @TheLayerForge :

forest green and black petg.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.