Halloween Boo Sign

Easy to print and fun to make!

perfect for your candy table, coffee table or any corner of your house

Specially designed to fit in the buildplate of any mid size printer.

The base is one piece. and every letter is a separated file so you can print it in different colors if you want to.

there are a couple of accesories to personalize as you like:

-spider and spiderweb

-witch hat (to print in multicolor just add a “filament change” at height in your slicer)

-witch broom

just print them and glue them on top!

Print Settings

Material: PLA / PETG

Layer height: 0,24 mm

Print time: about 7 hours total for all plates

Nozzle diameter: 0,4mm or 0,6mm

Infill: 10-12%

Perimeters: 2

Supports: no

Printing Tip

the tolerances are a little tight, so make sure you don't have "elephant foot” in your printer to get them to fit right. if you can't avoid it then you just have to scrape or sand the base of each letter a little to make it fit.

You can see my other models here:

dgoalva | Printables.com