Search models, users, collections, and posts

Eddie The Eagle Ray Flexi

3D_Grandpa
Toys & Games>Other Toys & Games
IP Report
GIF

Print Profile(4)

All
P1S
X1 Carbon
X1
P1P
H2D
A1
X1E
H2D Pro
H2S
P2S
H2C
X2D
A2L
A1 mini
Eddie Standard Size
Eddie Standard Size
Designer
3.5 h
1 plate
4.8(288)
Eddie, scaled 150% in X and Y directions
Eddie, scaled 150% in X and Y directions
Designer
5.6 h
1 plate
4.7(64)
A1 Mini compatible Eddie
A1 Mini compatible Eddie
Designer
3.7 h
1 plate
4.6(56)
PLA SILK , A1mini compatiable
PLA SILK , A1mini compatiable
3.1 h
1 plate
4.6(72)
Open in Bambu Studio
Boost
3021
7031
592
328
8 k
4.1 k
Released 

Description

This is Eddie The Eagle Ray, the latest member of my flexi sea creature family!  You can see the whole family in the  attached photo, which includes Eddie, Susie, Sally, Lucy Long-legs, Timmy, and Tall Timmy.

 

The larger Eagle Ray in the photo is simply this model scaled to 150% in the X and Y directions.  It doesn't feel quite as flexible as the standard sized one; probably scaling it height-wise too would be better, but really should be remodelled to use the same cell size as the standard one.

 

The standard sized one is printed in Bambu Lab PLA Basic, and the larger one in BamBu Lab PLA Silk+.

Boost Me (for free)

If you like this newest member of the sea life family, and have a boost to spare, I'd appreciated it! 

Membership

If you wish to sell prints of this model, please subscribe to a commercial license.

Join
flexi
eagle ray
starfish
ray
fidget

Comment & Rating (592)

(0/1000)
@user_599990402
tried twice. would not print correctly.
The designer has replied
3
Reply
@3D_Grandpa
Yeah, that's a mess ☹️. I'd guess that you need to clean your build plate and maybe use a glue stick to improve adhesion.
2
Reply
@THEBOYGmans
Just use hot water and dish soap Should be good by the way, touching your plate can cause bad adhesion because of the oils on your hand
1
Reply
@alsc16
Put lacquer on it Nelly
Show original
1
Reply
@user_120675366
Boosted
Print Profile
A1 Mini compatible Eddie
printed great! added my own touch! Matt the Matta Ray!
The profile uploader has replied
4
Reply
@3D_Grandpa
Nice!
0
Reply
@Loganwolverine8
file?
0
Reply
@user_120675366
Boosted
Replying to @Loganwolverine8 :
The original creator will not let me upload the file
0
Reply
@user_3192717002
Print Profile
PLA SILK , A1mini compatiable
started spilling extra filament and lots of holes/gaps
2
Reply
@user_1435697792
that’s what keep happening to mine
(Edited)
2
Reply
@smetm33
Happened to me twice. I gave up on this one.
0
Reply
@capender
Replying to @smetm33 :
Same
0
Reply
@user_3285725259
Boosted
Great print! Some advice for those struggling that I haven't seen anyone comment yet: Raise your layer one bed temp! I had failed prints due to adhesion issues on my A1 mini multiple times even with a clean plate. The solution was to raise the layer one bed temperature to 70 Celsius. I also upped the nozzle a couple of degrees on the first layer as a precaution although this probably didn't have much effect. Since then I've printed twice with no issues, so if your printer is in a cold room in December, remember the build plate will be less "sticky" for the melted plastic.
2
Reply
@warley
what filament colors do you use
Show original
0
Reply
@user_3285725259
Boosted
Replying to @warley :
Its the Bambulab PLA basic. this one is Sunflower yellow, turquoise, Mistletoe Green and Red
0
Reply
@FreeTheFatira
Print Profile
PLA SILK , A1mini compatiable
beautiful. definitely printing more of them
0
Reply
@user_765697899
what filament is that?
0
Reply
@FreeTheFatira
Replying to @user_765697899 :
https://a.co/d/hAIZ2PX Sovol: copper/purple/green
0
Reply
@FreeTheFatira
it's one of my favorites
0
Reply
@HarryButton
some of the layers didn’t adhere together. could it be my mix of filament: PETG, PETG HF and PLA? I am new to this so any info would be appreciated
The designer has replied
0
Reply
@3D_Grandpa
Yes, mixing filaments like that will very likely cause issues. Best to stick to one filament type in a model - i.e. all PLA or all PETG.
0
Reply
@HarryButton
thank you for the feedback.
0
Reply
@DatMellenGuy
PLA & PETG do not play nice together
0
Reply
@CamTheMannnnnn
love the flexibility and how it contours. really great print. thanks for sharing 👏
3
Reply
@Barker_Parker
Boosted
Print Profile
Eddie Standard Size
awesome added it to the collection
3
Reply
@3548276626
Print Profile
Eddie Standard Size
This is the second one that I have printed off and they both look awesome. I am so happy with them.
3
Reply
@user_4232945427
Print Profile
Eddie, scaled 150% in X and Y directions
printed great thank you
2
Reply

License

If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

flexi manta ray
flexi manta ray
MingGY
43.2 k
12.1 k
Flexi Manta Rays
Flexi Manta Rays
Flexi-Maker
5.5 k
1.4 k
Flexi Cownose Ray
Flexi Cownose Ray
Bruddz
2.2 k
1.3 k
Flexi Manta Ray | Print in Place – NO SUPPORT
Flexi Manta Ray | Print in Place – NO SUPPORT
Creonic Lab
18.2 k
4.9 k