Search models, users, collections, and posts

IP Report

Print Profile(1)

All

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

4.3 h

2 plates

4.6(5)

Open in Bambu Studio

Boost

212

266

118

Released

Description

Summary

These dividers fit into the card storage boxes you get when you buy a Magic: The Gathering bundle. The clip on the side helps the dividers stay in place and upright when you take cards out, and stop the other cards from falling over

Print Settings

Printer Brand:

Bambu Lab

                                            Printer:                      
A1

Rafts:

                                            Supports:                      
No

Notes:

To make it easy to line up the inlays with the dividers, I found it easy to import the files 2 at a time, doing each inlay and matching divider. If you get a prompt asking if this is 1 object with multiple parts click yes, then both parts will move together and you will not need to do any further aligning

magicthegathering

Magic: The Gathering

MTG Deck Box

Comment & Rating (6)

@yaya

Print Profile

0.2mm layer, 2 walls, 15% infill

Really good to sort out cards!

@Kantusino

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect

Show original

@ziller99

artifact question mark?

@Rowen_Blackwing

Print Profile

0.2mm layer, 2 walls, 15% infill

Little to wide for a standard 100-500 count white box of Magic the gathering cards. I trimmed off the piece on the side and removed probably 1/16th of an inch allow it to fit better for my storage. Print was solid and looked fantastic.