Furious Tourbillon V2
Print Profile(4)
Description
Tourbillon V2
Building on the original, stability has been increased to prevent stopping due to excessive tilt, achieving "wind it for how long, it spins for how long"The model is quite complex and may require extensive sanding, if you have poor manual dexterity, do not print it, giving it a low rating arbitrarily after printing is not fun =).The model may not function due to any small tolerances, this is not a problem with the model, try calibrating your printer.
2025/09/07 update: Added the perforated part that was not uploaded due to an oversight
Use a steel shaft (one from a toy car will do), if it's too long, you can print a second plate of perforated parts, glue is required, the parts that contact the steel shaft need to be glued firmly (measure the size before gluing)
The holes around the part above need two screws (only two!), tighten the outer ones, as shown on the cover, otherwise it won't spin, a slightly larger model is fine, I used M3*6 which required drilling, it is recommended to use smaller ones
Yes, it's still a 608 bearing :)
PS: The longest a previous winding spun was 1'54"
Boost Me (for free)
Please, give me a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)