Faceted Low-Poly Wastebasket Modern Design H2D

Inspired by modern low-poly aesthetics, this trash bin combines style with function. Ideal for contemporary homes or offices. I use it as a very big poop colector for my H2D but also in my home wherever I need a good loocking and easy wastebasket.

I printed with a 0.8mm nozzle and 1.2mm wall thickness and 0.4mm layer hight in Bambu ABS-GF. 
It can be printed with all the common filament types. (PLA, PETG, ABS, ASA, Nylons…)

I reccomend a 0.8mm nozzle, 1.2mm wall thickness and 0.4mm layer hight for the best stability and strength. 

But you can totaly go lower:

• with a 0.4mm nozzle you can print up to 0.6mm wall thickness and 0.2mm layer hight
• with a 0.6mm nozzle you can print up to 0.9mm wall thickness and 0.3mm layer hight
• Feel free to adjust the profile according to your needs.
• For the best layer adhesion: don't go over half the nozzle diameter with your layer hight. That keeps the trash bin stable. 
• But much of its stability comes from its structual integrity due to the low poly design. 

If you enjoy my work, please feel free to support me: 

Tipp me via “Buy me a Coffee”:

https://buymeacoffee.com/hserf62fiz 

Boost me via Makerworld: