Tripod for Seestar and others
Print Profile(1)
Bill of Materials
- 3/8 - 16 bolt x 1:
- Light duty double loop chain x 1:
- key ring x 1:
Description
Tripod for Seestar and others
I wanted to be able to get my Seestars up off the ground. I designed this simple tripod to do the trick. It uses all PLA. I used PLA Glow on the leg connectors and feet so that it shows up better at night. Only the feet need support. Turn it off for all others. I used a brim on all the tubes and connectors. The top is designed to fit a 3/8”-16 bolt. Pick a length that is appropriate for either your Seestar or the adapter you are using. I used plain PVC cement for all the permanent joints. I only connected two tubes together so that I could break this down and put it into a small gym bag. One of the leg connectors is designed with a place for a hook so that you can support the legs better. I used basic light duty double loop chain and a key ring in the center. You’ll have to clip the outside end of each chain to create a “hook” to attach to the legs. (see picture)
You’ll need to print:
- 1 head
- 3 head connectors
- 3 feet
- 3 chain connectors
- As many tubes as you desire
- Enough of the other connectors to make up the difference.
The .3mf file has a complete set for the size I made with 15 tubes. The A1 mini version is exactly the same except for the length of the tubes.
Boost Me (for free)
If you like this, consider boosting me!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)