IPad Desk Shelf Mount - Free 3D Print Model

Search models, users, collections, and posts

Austen

Household>Office

IP Report

Print Profile(1)

All

P1S

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.2 h

1 plate

4.8(13)

Open in Bambu Studio

Boost

180

578

376

157

Released

Description

iPad Pro 13" Desk Shelf Mount

I designed this mount to align my iPad Pro 13" perfectly with the bottom edge of my Studio Display while sitting on my desk shelf. The mount holds the iPad at a 45-degree angle and slides snugly onto the shelf.

The shelf I used (purchased from Amazon) measures 20.2mm thick with an added veneer. If your shelf is slightly thinner, you can add a layer of felt for a tighter fit. In my setup, there's zero wobble or play—the fit is solid.

The mount is a single, solid piece and uses about 379g of filament. I printed it with 100% infill to ensure durability and give it a premium, weighted feel. You can reduce the infill if you want to save material, but I wanted something that felt substantial.

No glue or fasteners are required—it simply slides on and can be easily removed when not in use. I also printed a smaller version for my phone, which works great.

Comment & Rating (18)

@user_1328709226

Print Profile

0.2mm layer, 2 walls, 15% infill

I have adapted the model for my needs, since my board is 25mm thick (ikea). Then I also glued some felt on it, because I use my tablet without a cover. Unfortunately, I didn't have enough felt anymore, so it doesn't look optimal. But I will renew the felt.

The profile uploader has replied

@user_1674466684

looks great!

@Ghost313

This was a lifesaver for my setup. Initially, I had my iPad in mind as the primary device, but then I remembered that I have two keyboards. One of them is a metal base keyboard, which is quite heavy. However, it fit perfectly into the shelf, so now its my keyboard shelf.

(Edited)

The designer has replied

@user_1674466684

oh wow I love that! going to use mine for that now!

@KevsRetroGaming

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

love it

@JakobKrenek_520

does it have clamps? or do I have to buy them?

@yoshiost

Print Profile

0.2mm layer, 2 walls, 15% infill

scaled it to my table so I can make a stream deck/docked mode phone. easy print.

@Egini

Print Profile

0.2mm layer, 2 walls, 15% infill

so cool, so helpful

@Schooo

Print Profile

0.2mm layer, 2 walls, 15% infill

This was perfect for my monitor riser, but I had to tweak the sizing a little in order for it to be a snug fit on mine

@voliprints

Print Profile

0.2mm layer, 2 walls, 15% infill

Basic but works well.

@lafpat

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@user_1674466684

thank you!

@user_469388714

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.