SPILLPROOF2 AMS 2 Pro Desiccant Boxes - Rear Spot

SPILLPROOF2 AMS 2 Pro Desiccant Boxes - Rear Spot

Compatible exclusively with Bambu Studio 2.X and Bambu Handy - Not compatible with Bambu Studio 1.X

The ‘holes’ in this design are generated by the slicer and visible in Bambu Studio's Preview. 

Use print profiles as-is, advanced users can tweak pattern and density of infill in Bambu or Orca Slicer. 

This series of Models are based on my SPILLPROOF AMS Desiccant Boxes for the original AMS.

• Works in the Rear location in the AMS 2 Pro, note that this is the only box in the SPILLPROOF2 series that requires you to remove spools, unfortunately there's no way around this. 
• If you want to use the AMS 2 Pro's Drying capabilities, print this in either PC, ASA, ABS, PA6-GF, or PA6-CF filaments or other high heat resistant filament.  
• If you print this in PLA or PETG you'll need to remove it before drying filament.
• To install: fill with desiccant, insert into crevice, then PUSH DOWN to secure. Failure to push this box down will cause it to rub against spools. 
• To remove: pull forward (there is a small indentation to reach with a finger nail or tool near the top edge) grasp on both sides, and lift out.
• Designed to fit the new AMS 2 Pro, for boxes for the original AMS click here: https://makerworld.com/@AeonJoey/collections/1985627-original-ams-desiccant-boxes 
• Open and Close the lid slowly and carefully. 
• Specifically designed to not explode-open inside AMS 2 Pro while inserting or removing
• Lid cannot slide off inside AMS 2 Pro
• Works with Silica Gel beads, Activated Alumina beads, Molecular Sieve beads, and small bead packets.
• For even better Desiccant drying, check out the full SPILLPROOF2 series: https://makerworld.com/en/collections/6175939-ams-2-pro-desiccant-boxes 
• As featured in BV3D: Bryan Vine's video about Desiccant in the AMS:

Versions for each popular hygrometer variety are available:

Find your hygrometer, or no hygrometer:

SPILLPROOF AMS Desiccant Box - ROUND Hygrometer

SPILLPROOF AMS Desiccant Box - RECTANGULAR Hygrometer

SPILLPROOF AMS Desiccant Box - No Hygrometer

SPILLPROOF AMS Desiccant Box - Enopyo/Ali-Express Hygrometer 

SPILLPROOF AMS Desiccant Box - XIAOMI MIJIA 2 Hygrometer

SPILLPROOF AMS Desiccant Box - AINIV / VAIKBY Hygrometer

SPILLPROOF AMS Desiccant Box - HOYIOURS Hygrometer
 

SPILLPROOF AMS Desiccant Box - SCREENLESS Smart Hygrometer