Titty Twister Hueforge (From Dusk Till Dawn)

Please consider giving me a BOOST to help me continue creating free files

🌇🧛🏻FROM DUSK TILL DAWN- Titty Twister - HUEFORGE EDITION 🧛🏻🌇

My first HueForge project – more challenging than I thought! I am pleased to make my result available to you here.

Print with 100% infill, a layer height of 0.08 mm, and a base layer of 0.16 mm.

The model measures 163.2 x 133 mm.

You can print with higher layer heights below the minimum depth of 0.48 mm.

The maximum depth is 2 mm, the actual depth 2 mm.

🎨 Filaments used:

• ⚫ PLA JAYO Black: Transfer distance: 1.7 mm
• 🔴 PLA Kingroon Red: Transfer distance: 5.6 mm
• 🟡 PLA BambuLab Basic Yellow: Transfer distance: 6 mm
• ⚪ PLA JAYO White: Transfer distance: 8.2 mm

This print uses 4 different filaments.

🔄 Switching instructions:

• ⚫ Start with black.
• 🔴 Switch to red at layer 8 (0.72 mm).
• 🟡 Switch to yellow at layer 13 (1.12 mm)
• ⚪ Switch to white at layer 14 (1.2 mm) for the rest.

Feel free to upload customized profiles, and I am always open to suggestions for improvement.

Also feel free to check out my other creations.