Bambu Lab poop slide; poop shute for X1, X1C & X1E

A model for disposing of filament waste from Bambu Lab 3D printers.
Easy to use and quickly empties filament.
The chute is attached using a foot of the 3D printer. After printing the chute, simply lift the printer slightly and slide the chute into the back left corner, then lower the printer and you're done!

To simplify the process, there is a "drawer"
When it's full, simply pull it out, empty it, and slide it back in, done!

This makes emptying the drawer/box (collection container) quick and easy.

Three files are included.
1. The poop chute itself
2. Poop drawer/box without Bambu Lab logo
3. Poop drawer/box with Bambu Lab logo

The poop chute has a recess on the front and rear walls in the area of the chute, this is so that the LAN cable can be plugged in with the X1E model. (See images)

Printer settings:

To make printing as easy as possible for you, I have designed the models to print with the preset print settings.

For printing the chute:
-0.20mm standard @BBL X1C
-Enable supports
That's all you need to do

For the drawers/box (collection container) without logo:
-0.20mm standard @BBL X1C

For the drawers/box (collection container) with logo:
-0.20mm standard @BBL X1C
-Simply color the embossed area of the logo in the slicer.

That's all you need to do.
If you wish, you can also use other settings, however, it is no longer guaranteed that the different parts will fit together.

Filament used:
-Bambu Lab PLA Basic Silver
-Bambu Lab PLA Basic Black (Only for the logo)

Printer used:
-Bambu Lab X1E + AMS