Sandsberg Tarendo Skadis Ikea Panel Spacers

Hello,
I created these spacers for the Sandsberg/Tarendo table because they cannot be assembled with the Ikea Skadis panel fasteners, as the table frame's shape is different.
Four 6 mm holes must be drilled into the table's metal part where the spacers attach.
For the printed pieces, countersink with a 6 mm drill bit before installation.

What you need:
Four 60 mm long M6 hex screws.
Four 6 mm diameter nuts.
Four washers, Outer diameter: 12 mm, Inner diameter: 6 mm

Happy printing.

If you like the project, please support me. Thank you.