Dyna Dry Box / Filament Box 4L w. Sensor, Bearings max. Width - Free 3D Print Model

Search models, users, collections, and posts

rauschgiftengel

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.28mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

4.8(30)

0.28mm layer, 2 walls, 15% infill

3.8 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

157

313

201

Released

Description

German Translation below.

Dyna Dry Box / Filament Box 4L w. Sensor, Bearings max. Width because my spools has a rounded edge - doesnt fit the original one.

Caution: I made a completely new model from scratch - the parts are not compatible to the original one. 4x Bearing 608ZZ needed. Please check to original design page for the links.

I printed all the parts in draft settings and they fit abolutely fine. Need some small supports for the humidy sensor and the axles for the bearings. Tree support is more than enough.

If you need some modifications, i upload the original Fusion360 (as i allways do) i´m so tired of asking for the original files - everybody allows remixes, but noone wants to share their original files, so everybody has to f#*%& around with stls - and in the end we got some crappy “modifications” instead of some fine classy models.

Dyna Dry Box / Filament Box 4L m. Sensor, Lagern max. Breite, da meine Spulen eine abgerundete Kante haben - passt nicht zu den Originalspulen.

Achtung! Ich habe ein komplett neues Modell von Grund auf neu erstellt - die Teile sind nicht mit dem Original kompatibel. 4x Kugellager Bearing 608ZZ benötigt. Die Links zu den Boxen und Lagern bitte dem Original-Design entnehmen.

Ich habe alle Teile in Entwurfseinstellungen gedruckt und sie passen absolut gut. Es fehlen noch ein paar kleine Stützen für den Feuchtesensor und die Achsen für die Lager. Baumstütze ist mehr als genug.

Wenn du Modifikationen brauchst, lade ich die Original-Fusion360 hoch (wie ich es immer mache), ich bin es so leid, nach den Originaldateien zu fragen - jeder erlaubt Remixe, aber niemand will seine Originaldateien teilen, also muss jeder mit Stls herumfummeln - und am Ende haben wir ein paar beschissene "Modifikationen" statt ein paar schöne, stilvolle Modelle.

dry box

Comment & Rating (34)

@user_1084807560

Print Profile

0.28mm layer, 2 walls, 15% infill

Easy to print, used Polymaker ASA

@dane3000

Print Profile

0.28mm layer, 2 walls, 15% infill

passt gut

@krakuspol

Print Profile

0.28mm layer, 2 walls, 15% infill

@Woodpecker3D

Boosted

Print Profile

0.28mm layer, 2 walls, 15% infill

I am very pleased with the result. Positive aspects include the shorter print time compared to other models and the fact that the hygrometer mount is a ring. Round hygrometers with straight or angled tabs can be clicked in. An improvement would be if the silica gel container also had holes on the sides to absorb moisture even better

Show original

@McCloud1985

Print Profile

0.28mm layer, 2 walls, 15% infill

evrytime i try to Put in the hygromter ,the ring breaks. i print with pla.

The profile uploader has replied

@rauschgiftengel

maybe there are minmal differences in size of the hygro, or maybe your printer is slightly differently calibrated ? you could use a little sandpaper to widen the hole or a knife.

(Edited)