Axle Tube Brake Line Clamp - Pivot/Lock Design
Print Profile(1)
Description
Hello and thanks for checking out my design!
This is a simple brake line clamp to hold a 3/16" brake line on a 3" axle tube. It is designed a bit large (3.025") to allow for excess powder coating thickness, because, let's face it, if my axle hadn't have been powder coated I would have probably just welded on a traditional brake line clamp.
*Each clamp takes a pair of 3mm allen screws (10-12mm long) and a couple of 3mm nuts, that should be a very snug fit into the part.
**The clamps print with some “sacrificial bridging” modeled in, so you'll need a 3mm (3/32") drill to clean up the holes.
***You may have to play with the scaling a bit to fit your specific axle tube; it's better to be loose, and wrap a piece of friction tape around the axle, than it is to be too tight and force/break the clamp.
****This is near the exhaust so it's gonna get hot.
*****If you use ABS it's going to shrink, so you'll need to scale it up by a percent or two…
And look, if you need a different size, shoot me a message. I'm not making any promises, but I like to help people out when I can.
If you feel that my work has helped you and you would like to help me back, please feel free to “Buy Me a Coffee”: https://ko-fi.com/crazycaseyscustoms , or it is also highly helpful if you would consider liking/rating/posting a build of my model, and/or subscribe to my YouTube channel linked in my profile.
Thank you, and happy printing!
-Casey
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)