Bikepacking fork cage

Strong fork cage for bikepacking that doesn't require screws to mount. Where other more pretty cages broke, this one survived. I've tested the cage on a 120km gravel bike ride. 

Mounting guide

1. Start with duct taping the fork to protect it.
2. Use double sided velcro to mount the cage to the fork. I used 2.5cm wide velcro.
3. Use one sided velcro(I used 2cm) on both left and right side of the three mount holes*. I Used 2cm wide velcro for this.
4. Either sew the one sided velco loops together or, like I did, use duct tape.

* If its hard to insert(if it sticks to the double sided velcro) use a small piece of plastic to seperate the veclo while inserting the one sided velcro from the double sided.