Skull and Piston Crossbones Wall Hanger

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

Not my art, just converted to a printable wall hanger.

Dimensions are 206 x 226 x 4 mm. Has keyhole on the back for hanging.

For those of those without AMS, there are 2 separate stl files, load them into slicer at same time as an assembly. You can then assign color by object which is labeled.

Sized to fit a 256 x 256 print bed but could easily be sized down to fit your bed in the slicer. You can also adjust the z scale up for thicker print. 

Check out other Bar Signs and Funny Signs Here!

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.