UniFi Switch Ultra 210W (USW-Ultra-210W) RACKMOUNT

I am not the original Creator of this.  I have based my drawings off of https://www.printables.com/@RuFiK_62668 https://makerworld.com/en/@rafaell68 and his  model.

Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws between : M3 x 20, M3 Threaded Inserts.

Items:

3x M3 x 0.5 mm Thread Size, 6.4 mm Installed Length

3x M3x0.5mm 20mm Socket Head Screw

Cat5, Cat6, or Cat6A keystone - If you don't want the keystone user RuFiK's model

I have modified the design a little.  The switch doesn't fit as snug as theirs and there is a Keystone Jack.

I have added Manual Tree support to the Mounting Slots, the Switch opening and keystone jack.  I tested with a Networx KJ-C6090 however any keystone should work.

Mine is printed in BambuLabs ABS-GF White with Gizmodorks HIPS on X1 Carbon.  This model is too large for A1 mini to print as is.