Dr. King Schultz Dentist Wagon - Django Unchained - Free 3D Print Model

Search models, users, collections, and posts

Jordan Miller

Miniatures>Other Miniatures

IP Report

Print Profile(1)

All

X1 Carbon

H2D

X1E

P1P

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 15% infill

Designer

28.9 h

9 plates

5.0(2)

Open in Bambu Studio

Boost

105

Released

Description

Dr. King Schultz (portrayed by Christoph Waltz) dentist wagon from Quentin Tarantino's masterpiece 7th film. I'm a huge fan of the film, so I wanted to model and paint a scale model of the iconic vehicle.

All parts were printed in Bambu Labs basic white PLA, then primed with spray primer, and hand painted with acrylic paints. I used a few wood color copic ink pens and sponges. Then, lots and lots of superglue and accelerator.

Many of the parts are very small and fragile, but I designed and placed everything to my best ability as to require very little support and post processing. While I printed these all at normal speed, your mileage may vary. When I printed this project, I wasn't aware you could print in silent mode to slow things down!

The main wagon box and roof were attached with 6mm rare earth magnets, which are very affordable on Amazon.

If you choose to print, please share your results!

Comment & Rating (14)

@user_506781369

I enjoy designing cars like this and this is a very nice job.

The designer has replied

@jmillerdesign

Thanks!!

@user_3347630393

at what scale is the model

The designer has replied

Show original

@jmillerdesign

That's a tough one to answer since I don't have an actual scale of the wagon used in the film. But, if I had to guess, I would say it's approximately 1:12 scale.

@davigazevedo

Hello My mother has a wine box and she wants a set of wheels. Can I use yours? Can you please provide me with its dimensions

The designer has replied

Show original

@jmillerdesign

Hi, can you elaborate a bit more?

@user_1560181187

Very thoughtfully printed. I like how you printed it in a fashion that makes it easy to paint the pieces, very smart.

The designer has replied

@jmillerdesign

Thank you for the kind words! I definitely tried my best to model it in a way where it was easy to print, paint, and assemble!

@xandbello

Boosted

Greetings, is an assembly guide available

The designer has replied

Show original

@jmillerdesign

Hello, I don’t, but I should make one.

@user_714532806

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

The profile uploader has replied

@jmillerdesign

Thanks for the rating!

@xandbello

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

The profile uploader has replied

@jmillerdesign

Thank you for the rating!

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.