Grounded Hueforge Poster
Print Profile(1)
Description
Boost Me (for free)
I would greatly appreciate a boost if you enjoyed this print. Also, consider checking out my other Hueforges on my channel. Thank you.
Shout out to @Lumpy3D for inspiring me to try to create my own Hueforge design. I made one of my most played games, and I think I'm addicted. I plan on making more for sure. Thanks again @Lumpy3D.
https://makerworld.com/en/@Lumpy3D
Hueforges can be resized by changing only the X and Y scale and leaving the Z height the same.
Hueforge art of the game “Grounded”
Print at 100% infill with a layer height of 0.08mm with an
initial layer height of 0.16mm. You may print at higher layer heights below the minimum depth of 0.48mm
The Max Depth is 2.2mm, and the Actual Depth is 2.3mm
I used the Arachne wall generator, which causes it to take a long time to slice. I switched it to classic wall generator for the print profile, but you can switch it back if you wish.
The Model is 179.20 x 234.00 mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #25 (2.08mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)