Brad

cover

IMG_4697.jpeg

IMG_4699.jpeg

IMG_4698.jpeg

IMG_4695.jpeg

IMG_4696.jpeg

IMG_4652.jpeg

IMG_4653.jpeg

IMG_4654.jpeg

IMG_4655.jpeg

IMG_4660.jpeg

IMG_4659.jpeg

IMG_4658.jpeg

IMG_4657.jpeg

IMG_4656.jpeg

Screenshot 2025-04-26 at 2.57.01 PM.png

Screenshot 2025-04-25 at 11.00.45 AM.png

plate_1.png

plate_2.png

plate_3.png

2025-05-02_5d1dd6520d3ee8.jpeg

this is the 3 drawer version of the original monitor stand with drawers. .4 mm Nozzle ( but can be printed with .6 or .8 if wanting to bring down print times.)0.2mm Layers with 2 walls15% infill 3 plates if printing all the drawers.

0.2mm layer, 2 walls, 15% infill

3vi1

Screenshot_20251122_074616.png

When I printed the original profile, I found the tolerances on the bottom drawer to be too tight: it was was incredibly hard to slide in and out.  So, I removed &lt;1mm off the X and Z axis - allowing it to glide in and out smoothly.  &nbsp;I also found that the grab-hole on the bottom drawer was still way too small for me to get my adult finger into to open - so I also added a negative cylinder that makes the hole larger.  It can be moved down on the z axis, or even enlarged if you have larger fingers.

Tweaked drawer size and bigger finger hole (adjustable)

Monitor Stand with Drawers

After posting my first monitor stand with drawers, i had multiple requests to make one with a 3rd drawer. Here is the 3 drawer version of my original Monitor stand. the 3rd drawer could be printed by itself and will work with the original montior stand with drawers, however it will not stop when pushed in (as the entire back is open on the first version.) this version has a closed back with only a small hole for charging cables.

Monitor Stand with "3 Drawers" 

ASIA

Print Profile(2)

Description

Comment & Rating (106)

This remix is based on

License

Related Models