Ghostbusters Motorola style MT500 walkie talkie

Remix of Djfx's Motorola MT500 cosplay tribute. 

Modifications:

Adding threaded holes for M3 screws, this helps the prop look a touch more realistic, in the pictures you can see I've added silver hex in the top and black hex in the back. Max depth is 8mm. 

Made the screw in section on the back a separate printable screw in cover, again to make this feel a touch more like a multiple part item. 

Separated the black parts on the side (textured grip and black surround for the round silver parts) 

Made a new stubby antenna

Removed the centre section of the middle piece. 

Plates:

The upload is two plates, black parts (I used matte black, think it suits it well) and silver parts. 

Print both plates, then start to assemble. 

Assembly:

Glue the front and back to the silver middle piece, taking care to get as accurately lined up as possible. Superglue sets fast, so be ready!

Then, you can glue on the side pieces, knobs and stubby antenna. Leave time between each section to enable the glue to set.  Screw in the back silver screw, either by hand, or very carefully using a coin or similar, be mindful though that it's a tight fit and plastic is easy to mark! 

Happy busting!