Halohedron - Geodesic Dome Lamp
Print Profile(1)
Bill of Materials
Description
Halohedron is a collection of 4 different geodesic dome lamps with 2 base designs to choose from. The domes are thin enough to act as light diffusers for the Bambu LED Lamp Kit. Each dome is inspired by different architectural domes found across the big dome called Earth.
Mix and match domes and bases, they are all compatible and all models can be printed on the A1 Mini. The bases print without supports but the domes can be a challenge to print and take between 6-12 hours depending on design. I printed mine using a tree support that goes up the inside of the dome to support the top. Some domes require a bit of support on the outside too. The internal tree can be broken up and removed from the dome quite easily. The domes have a diameter of 150mm while the base is 120mm in diameter.
I tried a few colours too, and found basic white to be the most effective at letting light pass though. Darker colours, such as the three-coloured RBG print of the Epcot dome shown in the photos, do not let much light pass through at all - but it looks cool😁
Printing in white is the best option for light transmission.
Boost Me (for free)
💡💡💡💡 Thank you for checking out this model - Light up my day with a Boost :) 💡💡💡💡
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)