Fresh Flush Aroma WC Instant

Automatic Toilet Tank Liquid Cleaner Dispenser

This is the first version that has been working for several days; it requires liquid and perfumed soap for a clean flush. It works by dripping for a short time when the toilet tank water is flushed with its small float.

IMPORTANT: PRINT IN PETG for a longer lifespan. I will be reading your improvement ideas for a future version. THANK YOU

ASSEMBLY

First, place the arm that will act as a pressure closure in the drip hole.

IMPORTANT: Surfaces must be completely flat.

Second, insert the pin through the hole that holds the arm.

Third, you must previously know the height of the lid that closes the cistern and the bottom of the water.

This height can be adjusted without difficulty before or after (they are pressure-fitted).

Fourth, place the body in a wide area so that the arm has

a pendulum movement due to the lowering and raising of the water.

Fifth, place the float in the arm slot.

The part of the float must be below the water level to have buoyancy.

Sixth, add liquid and see at what optimal height it does not come out of the dispenser depending on the depth of the float.

Seventh, place the lock on the float so that it does not come out of the slot.

Eighth, put on the lid and YOU'RE DONE.