Nasa 905 Kit Card 747 Jumbojet with Spaceshuttle - Free 3D Print Model

Search models, users, collections, and posts

TobiDeve

Toys & Games>Construction Sets

IP Report

Print Profile(1)

All

P1S

H2D

X1E

P1P

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm , 2 walls, 15% infill colored and uncolored

Designer

9.8 h

3 plates

4.4(17)

Open in Bambu Studio

Boost

561

1494

676

214

Released

Bill of Materials

Bambu Filaments

Select all

Description

🛫 SPACE EXPLORATION VEHICLE
SERIES 3/3
NASA 905 KIT CARD

The third model in the Space Kit Card series brings the legendary NASA 905 Shuttle Carrier Aircraft to your print bed – complete with a low-poly Space Shuttle riding piggyback.

This iconic duo is modeled as a detailed, modular 3D-printable kit card, allowing you to recreate one of the most unique aircraft pairings in aerospace history. Perfect for display or educational purposes!

All parts come neatly arranged on a sprue for clean, support-free printing.

Included:
✈️ Detailed Shuttle Carrier Aircraft (Boeing 747)
🚀 Removable Space Shuttle
🛠️ Fuselage, wings, gear and shuttle in flat layout
🖼️ Optional display stand (with NASA 905 base plate)
✨ Simple, clean low-poly aesthetic

🖨️ Support-free and fun to build – just print, snap, and admire.
This is Model 3 of 3 in the Space Kit Card Series.
Collect them all for a complete fleet!

Comment & Rating (24)

@user_548396069

Boosted

Print Profile

0.2mm , 2 walls, 15% infill colored and uncolored

I printed it by cutting some parts so that it can be printed on the A1mini

Show original

@Deadwood66

Print Profile

0.2mm , 2 walls, 15% infill colored and uncolored

Good model, some of the parts are a tight fit but it came out great.

@ctschlosser

Print Profile

0.2mm , 2 walls, 15% infill colored and uncolored

came out great!

@WillCAD

Boosted

Print Profile

0.2mm , 2 walls, 15% infill colored and uncolored

Cool design with a few minor issues including a little warping on the front of the plane and back wings and filament from the pins being printed into some parts in the ams version (I used flush cutters to remove the pieces).

@javiercm1988

Print Profile

0.2mm , 2 walls, 15% infill colored and uncolored

some pieces are difficult to fit the rest perfect

Show original

@McCanic

The plane is very small because of the frame. If there was no frame, the size of the plane and its parts would be better. Such a small plane, a few centimeters long, is not nice at all. The small parts are very delicate during assembly. In order to remake a broken part, I have to print the whole thing again. There should be no frame.

The designer has replied

@tobi_ebers

Thank you for your feedback I will address this by re-uploading the model without the frame

Show original

@Tomas_salerno

que modeo tan genial Richard de Arkansas y Eduardo Sacheri

@3D_PRINTINGTEAM

Boosted

the best model plane out there

@StaticDoom

Print Profile

0.2mm , 2 walls, 15% infill colored and uncolored

Wish it had more detail and putting together would be more easier,

@thehatmancometh

I don’t know if this is makerworlds fault but even when I select the P1S option I can’t print it due to incompatibility issues. If it’s a fault on my end, let me know but if not maybe it’s the kit card frame? mostly looking for advice but I could deal with an option for no frame. thanks in advance

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Jeep Kit Card

agepbiz

70.9 k

22 k

747 Airplane Kit Card

planes01

4.2 k

1.8 k

GIF

Golf MK1 - Kit Card

Kocyns

34.3 k

15 k

Formula 1 Kit Card

TSmitty3D

28.9 k

13.3 k