Search models, users, collections, and posts
Sakura D5 Lite Trays (Behind Motor & Back)
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
46 min
1 plate
Open in Bambu Studio
Boost
3
12
0
0
13
9
Released
Bill of Materials
Bambu Filaments
Select all
List other parts
- M3x10 x 2: Button Head Screw
- M3x25 x 2: Button Head Screw
Description
These trays are intended for the Sakura D5 Lite RWD drift chassis, and fit behind the motor and at the rear of the chassis. I recommend printing them on a carbon fiber or other smooth texture plate for a nice finish. Four (4) M3 bolts are required, see below for specs.
The tray just behind the motor is a nice place for a receiver and gyro or a small battery if you want the top heavy vibe. The rear tray is designed for the ESC and a receiver if you so desire. I have not tested these on any other Sakura chassis, if they fit anything else let me know.
The trays were designed in TinkerCAD.
Needed to complete:
- Two (2) M2x10 (or M2x12) button head bolts & Two (2) M2x25 button head bolts to attach to your Sakura D5 Lite chassis.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)