user_2598007172

0.2mm layer, 2 walls, 15% infill

Hi there, thanks for the feedback. I did a reprint this morning to confirm. It fits my goggle fine. Its friction fit, try pushing down.

Bobby Phan

Maybe its because of the difference in faceplate. Are you using the wider flatter one?

I see. So I’m having the same issue that the other user is having with not fitting in properly in the back. I also notice there is a really big gap between the vrx and the goggles. Those are goggles 2 btw and the faceplate is the one that comes by default. 

Do you think you could fix those issues? I can help with measurements and testing if you don’t own the goggles 2

Riccardo

I don't have the goggle 2 for testing but send me the measurements from the face plate to the back of the fan housing and I'll see what I can do. If you can find out the radius of the face plate that would be good.

PINKYZUP

Thanks for taking the time to provide feedback.

Fits perfectly on goggles V2 (with narrow faceplate). Printed on A1 Mini with PLA Basic, default settings, standard support.

user_2375865001

user_1436072349

erron1352

adison.wu

cover

Custom HDZero Goggle Walksnal VRX mount 1.jpg

Custom HDZero Goggle Walksnal VRX mount 2.jpg

Custom HDZero Goggle Walksnal VRX mount 3.jpg

Custom HDZero Goggle Walksnal VRX mount 4.jpg

plate_1.png

2025-05-01_838f64d37d3f28.jpg

JackThePro

PXL_20260525_100016870.jpg

PXL_20260525_095413402.MP.jpg

Thanks for making this model, it was a great starting point for my project.The changes made are as follows:<ul><li>Modified the rear profile between the fan cover and faceplate to fit flush with the faceplate</li><li>Modified the front bracket to extend an addition 3mm to fit a RunCam WiFi Link 2 VRX without having to remove the Echo Patch Antennas.</li></ul>Test fit using PLA, but I plan on reprinting it in PA if it ever fails.&nbsp;It is not perfect, but fairly close in the faceplate to fan cover dimensions.  You can always make an adjustment with very light sanding.  I believe it would still fit well if you lose another ¼-½ a millimeter when printed in PLA, but a material that shrinks more may fit differently.

Tweaked 4 HDZero Goggle 2 - 0.2mm layer, 6 walls, 25% infill

Walksnail VRX quick mount for the HDZero Goggle.&nbsp;For FPV nerds out there who wants to runs multiple VTX protocol. &nbsp;The quick mount allows mounting of the Walksnail RVX (or any other VTX) onto the HDzero goggle with TrueRC Antenna mount.&nbsp;The design enables you to easily take it on and off to switch between VTX protocol.&nbsp;&nbsp;&nbsp;

Print Profile(2)

Description

Comment & Rating (15)

License

Related Models

Walksnail VRX mount for HDZero Goggle

Print Profile(2)

Description

Comment & Rating (15)

License

Related Models