Mentos Diet Coke fountain

Made 2 models 5 and 10 Pcs, mentos loader with a release pin.

The Pin is very fragile and breaks easy, I had to make it small to avoid too much pressure rerouting from the nozzle.

Just print a few and replace if needed.

The pin is inserted from the inside with tweezers and the buttonhead pressed on from outside, some are tight, some are loose depending on the tuning of your printer/filament. I used a drop of glue to secure it.

Rinse with water to get the sticky out and reuse when dry.

Printed it in white to see the coke residue and for easy cleaning.

Have fun and enjoy.